Framing Nailer Buying Guide

Do you want to buy a framing nailer and not sure how to go about it. This Framing Nailer Buying Guide article will help you to make an informed decision to buy the best framing nail gun. There are different types of nail guns to choose from with different nail gun nails sizes that can be overwhelming at times. The table below shows some of the best framing nailers to buy in 2020!

Fraiming Nailer
Power Source
Magazine Configuration & Degree Angle
Collated Nails
Nail Head Type
Nail Size
Operating Pressure
Price
Paslode 905600 Cordless XP
Battery & Framing Fuel Stick, 21 Degree Paper-Tape Offset Full Head 2" - 3-1/4" 2-3 nails/sec
Hitachi NR1890DR
18V Lithium Ion Battery Stick, 30 Degree Paper Strip Clipped, Offset Round 2"- 3-1/2" Up to 2 nails/sec
BOSTITCH N80CB-1
Pneumatic Coil, 15 Degree Wire Weld Round Head 1-1/2" - 3-1/4" 70 - 100 PSI
NuMax SFR2190
Pneumatic Stick, 21 Degree Plastic Collated Round Head 2"- 3-1/2" 70 - 115 PSI
BOSTITCH F21PL
Pneumatic Stick, 21 Degree Plastic Collated Round Head 2"- 3-1/2" 80-120 PSI
Hitachi NR90AES1
Pneumatic Stick, 21 Degree Plastic Collated Round Head 2"- 3-1/2" 70 - 120 PSI

If you don’t have a framing nailer in your home, it is time to start budgeting for one. Don’t keep on wasting money hiring a nail gun whenever you need it. Borrowing too much from your neighbor can be nagging at times, it is good to have your own tool.

In some cases, you will find that you require some renovation at your home and yet you have a hammer which is very tiresome and time wasting. Why don’t you go with the latest technology of using a nail gun which is even easier to operate?

Are you a professional constructor and yet you are still using a hammer on your workshop? This is totally analog, you should be well updated and start using a framing nailer. This tool reduces time wastage, energy applied by the user and also provides efficiency facilitating quality work at the end.

What Is A Framing Nailer

A framing nailer is an automatic power tool that can perform the work of a claw hammer of hammering nails to join to planks at a much much faster speed. A framing nailer can drive or hammer 2 to 3 nails per second with much ease than using a hammer. The number of times you hit the hammer onto one nail to drive it into the framing assembly can be equated to the corresponding number of nails that can be driven into the framing assembly.

That is to say if it takes 2 to 3 hits to drive one nail, a framing nail gun will have driven 3 to 4 nails in the same time. This also happens with less fatigue on the hand. Read what is a framing nail gun used for!

How To Buy A Framing Nailer

Purchasing a framing nailer requires some guides, you cannot just walk in to a store and ask for any nailer gun that attracts your eyes without knowing what features you are looking for. The following are some of the guides that you should keenly understand before purchasing this tool.

Types Of Nail Guns

First of all, you should be knowing different kinds of framing nailers with their advantages and disadvantages. Each framing nailer has its own features, you might find a nail gun which has a coil style and another a strip style.

A coil style nailer uses flexible and long strings of nails which are joined with wires around the gun’s magazine, which store the nails in coil form. A coil style nailer hold a lot of nails compare to a strip style gun. In this matter you will not keep on reloading the gun after shooting the nails out, this helps you save a lot of time and energy.

On the other hand, a strip style nailer uses or arranges its nails along a stick or slender strip that slides into the gun’s magazine. It uses strips made of paper or wire to hold all the nails together. The greatest thing about this framing nailer design is that it has an equal distribution of weight giving it a well-balance compared to the coil style design.

There are so many other types of nailer guns that you should expect to come across. They are similar to a framing nailer.

Finishing Nailer

Finishing nailers are best in small projects, the nailer is not a light-duty but still they lack the power of a heavy-duty nailer. One can use them in assembling of new furniture or even installing cabinets in the kitchen. This tool is closest to a framing nailer.

Roofing Nailer

As the name suggest it is obvious that you need this tool to use on your roof, but not any other gun can do the same work as this. It is designed to keep the shingles attached to the roof perfectly.

Brad Nailer

If you are focusing on delicate carpentry chores this is the perfect nailer gun that you should be looking for. The guns are not that powerful, the nails used on the gun are squashed heads. This helps you not to ruin the fragile furniture that you are working on when firing the nails.

Flooring Nailer

When it comes to this gun, what should come in your mind is the work ahead and how tough it is. with the help of this gun you will be able to manage the toughness that is encountered during this tiresome work. It is perfectly designed enabling you get the exact depth and angle every time you shoot the nail out.

Purpose Of The Framing Nailer

We all know the purpose of a framing nailer, but one may need it just for a minor repair at their home while another person may need a framing nailer for a major construction project. Some modes are made to handle high volume application or high duty while others are made for small work. Before you get to that shop be aware of whether to purchase a tool just for a small chores or not. Do not make such a mistake thinking that all framing nailers are the same.

Many professional constructors look forward to purchasing a quality gun which will last for a long period of time. If you know nothing concerning this tools why don’t you ask an expert to purchase the perfect one for you. You can also seek some guide from the person selling you the tool.

Check The Nailer Power Source

As said earlier each nailer gun has its own features, there are different guns which use different power source. The power source differs depending on the work it is made to handle. The following are types of framing nailers and their power source.

Pneumatic Nailer

This is a nailer which is known to be among the best tools in the market. The gun drives out the nails using and air compressor which is measured psi (pounds per square inch) and volume. Its pressure should be equal to or greater than what required for the nails to get out. Pneumatic nailer is built to handle heavy duty work, making it the perfect framing gun for a constructor who needs a quality and durable tool.

Cordless Framing Nailer

It is powered by a battery which offers great mobility compared to the pneumatic nailer. This is because it does not need any air compressor to drive the nails out. The tool does not have the heavy power of a pneumatic tool but it has a quick startup time.

There is also other cordless framing nailers that are fuel driven, this tool uses combustion to drive the nails out. There is no cord or hose required in such a nailer gun. Any framing nailer that uses fuel is made to handle heavy duty work, it is also capable of driving out large fasteners even in hard materials.

Safety

Above all guides mentioned this is the most important thing that you should put in to consideration. Your safety comes first; it is good to a framing nailer that comes with protective guards that will shield your nailer from flying debris. The shield is also meant to protect you from the flying debris that might happen while driving out the nails from the gun. There are so many other features that are meant for safety, make sure to look for them before making your final decision.

Check For The Nail Type Compatibility

You might purchase a framing nailer and after loading some nails you will find that they are not compatible. Some nailer guns are only compatible to one type a nail which can be very disappointing to the user if he/she had no idea in the first place. For you to choose the best, make sure to settle on one that accepts several nails with different sizes and shapes.

Framing Gun Features

There are several features that you should look for when purchasing a framing nailer. Do not be in a hurry because you may end up buying the wrong gun and be disappointed when it comes to using it. The following are some of the main features that matters a lot when it comes to getting the right framing gun.

To start with, a good framing gun must be able to clear any jam that might occur in the process of using the it. It is normal for a gun to jam but still it should not slow you down because it has no easy access to the pace of feeding the nails.

Secondly, make sure you check out for the swivel tube mostly when you are using a pneumatic nailer. The swivel tube ensures that the tube does not get tangled up. With this feature, reloading of the framing gun becomes very easy for you.

You must also check on the nail depth. This is one thing that should be in your checking list, you might purchase a framing nailer that does not drive nails deep enough. It can be a total disaster to the user because the results after using the gun shall not be as expected. When the framing nailer digs deep the construction will be firm enough.

Conclusion

It is up to you to choose the framing nailer of your choice. As long as you follow the above guides, be guaranteed to get the best and the most appropriate gun for the work it is intended for. Do not waste your money purchasing any framing nailer that you come across because you might keep it at your home just for decoration.

If you find that even after reading the buying guides you are not in a position of making a decision, ask for some help from a person who is familiar with the tools. As you go to purchase the framing nailer, first make up your mind because you may get confused after getting to the shop where there are so many great varieties.